83
Creating patches
The changes you make to a Stamp Patch are temporary; they will revert to the original
settings when you switch to a different Stamp Patch.
If you want to keep the changes you make, you must perform the Save operation.
fig.front24.e.eps
1
Make sure that the [STAMP PATCH] pad is lit, and press the [SAVE] button.
The button will light red.
2
Press a visual pad [1]–[16] to specify the Stamp Patch number in which you want to
save your settings.
The [SAVE] button will go out.
Saving a Stamp Patch in another bank
1
While holding down the [STAMP PATCH] pad, press a visual pad [1]–[8] to switch
banks, then release the [STAMP PATCH] pad.
2
Press the [SAVE] button.
The button will light red.
3
Press a visual pad [1]–[16] to specify the Stamp Patch number in which you want to
save your settings.
The [SAVE] button will go out.
Saving a Stamp Patch (the Save operation)
[SAVE] button
If you want to cancel this
operation after pressing
the [SAVE] button, simply
press the [EXIT] button.
CG8_e.book 83 ページ ２００５年４月２０日 水曜日 午後１２時３分
Summary of Contents for CG-8
