manualshive.com logo in svg

Roland CG-8, User Manual

Share
Download
Roland CG-8 User Manual Download Page 62

 

62

 

Creating patches

 

To create a Photo Patch, proceed as follows.

 

fig.front21.e.eps

 

Here’s how to select the bank and number of the Photo Patch that you want to create 
or edit.

 

* The following procedure is not necessary if you’re creating the first Photo Patch in a newly 

created project. Simply proceed to 

 

“Selecting a Photo Effect”

 

 (p. 63).

 

1

 

Press the [PHOTO PATCH] pad.
If you want to switch banks, hold down the [PHOTO PATCH] pad, then press a visual 
pad [1]–[8] to select the desired bank, and release the [PHOTO PATCH] pad.

The [PHOTO PATCH] pad and any visual pads [1]–[16] to which Photo Patches are 
assigned will light.

 

2

 

Press one of the lit visual pads [1]–[16] to select a Photo Patch.

The selected Photo Patch will begin playing. The display panel indicates the bank and 
number of that Photo Patch.

 

Creating a Photo Patch

 

Selecting a Photo Patch

[PHOTO PATCH] 

pad

[EFFECT] 

pad

[PICTURE] 

pad

Visual pads [1]–[16]

[SAVE] 

button

[PREVIEW] 
button

While you continue 
holding down the 
[PHOTO PATCH] pad, the 
visual pad corresponding 
to the currently selected 
bank number will blink.

The Photo Patch will not 
change if you press a 
visual pad to which no 
Photo Patch is assigned 
(i.e., an unlit pad).

CG8_e.book 62 ページ ２００５年４月２０日　水曜日　午後１２時３分

Summary of Contents for CG-8





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands