31
Basic operation
Here’s how to select a project.
You can use the visual pads to easily select a project.
* You can’t load a project that’s not assigned to a visual pad. For details, refer to
fig.front16.e.eps
1
Press the [CHANGE PROJECT] button.
The button will light.
Of the visual pads [1]–[16], pads to which a project is assigned will light.
The left side of the display panel will indicate the number of the visual pad to which
the currently selected project is assigned, and the right side of the display panel will
blink “–”.
2
To select a project, press a visual pad [1]–[16] that is lit.
The visual pad you pressed and the [CHANGE PROJECT] button will blink.
In the right side of the display panel, the number of the visual pad you pressed will
blink.
3
Press the [CHANGE PROJECT] button.
The button will go out, and the CG-8 will begin loading the selected project.
The display panel will indicate “Load.”
When the selected project has finished loading, the display panel will indicate “– –”.
The project has finished loading. Now let’s select a Photo Patch and Stamp Patch, and
play back the image.
Selecting a project
[CHANGE PROJECT] button
If after pressing the
[CHANGE PROJECT]
button you decide to
cancel the operation, press
the [EXIT] button.
CG8_e.book 31 ページ ２００５年４月２０日 水曜日 午後１２時３分
Summary of Contents for CG-8
