Roland CD-2u, Owner'S Manual

Page: 45 / 140

Recording Acoustic Instruments or Vocals
(continued)
45
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
fig.extmic.eps
Here’s how to record using the connected dynamic mics or
stereo mic.
* Dynamic mics are highly durable, and are suitable for recording
instruments or vocals. They also have the advantage of not
requiring a power supply.
* This device also supports condenser mics that require a power
supply, as well as plug-in power mic. Connect the condenser mics
to the XLR type EXT MIC (L, R) jacks, and connect a plug-in power
mic to the PLUG IN POWER MIC jack.
* If you encounter a problem with noise or distortion, see “The recorded sound is noisy or
distorted” (Page 127).
4
Connect your mic to the EXT MIC (L, R) jacks or PLUG IN POWER MIC jack
located on the CD-2u/SD-2u’s side panel.
fig.connect-extmic-e.eps
Connecting the External Mics for Recording
If You’re Recording to an SD
memory Card If You’re Recording to a
CD-R/RW Disc
1
Turn on the power
(
☞
Page 22, 24).
1
Turn on the power
(
☞
Page 22).
2
Insert the SD memory card
(
☞
Page 26).
2
Insert the CD
(
☞
Page 29).
3
Set the audio source to “SD”
.
Press the [SD CARD] button so it’s lit.
fig.selectCD-e.eps
3
Set the audio source to “CD.”
Press the [CD] button so it’s lit.
fig.selectSD-e.eps
L R
Phone type, XLR type
Types of plugs that can
be connected
CD-2u_SD-2u_e.book 45 ページ ２０１３年１月２４日 木曜日 午前１１時３４分