Roland Camm-1Pro GX-300, User Manual

Page: 66 / 102

64
The Crop Mark Feature
About the Crop Mark Feature
The crop mark feature is used when cutting around the previously printed images is performed with applica-
tion software where the printing data and the cutting data operate simultaneously.
Crop marks are the marks used for alignment when cutting the printed material on the cutting machine. Sav-
ing on the machine the locations of the crop marks oriented together with the image makes it possible to
adjust the location to cut. When you use this feature, the operation method differs according to the program
you’re using.
Using the Included Program
Using the included Roland CutStudio program enables you to print, together with the image, crop marks that
the machine’s sensors can automatically detect, then perform alignment automatically and carry out cutting.
For information on how to perform this operation, see the electronic-format manual (“Printing and Cutting
Guide” (for Windows) or “Macintosh Cutting Guide” (for Macintosh).)
Crop mark: Cutting line:
Accurate cutting around the
graphic becomes possible
Origin point
Material
3
Part of Practice