© 2013 Roland Corp. U.S.
GT-100 System Program Ver.1.06
This system program updates your GT-100 to the latest version 1.06.
How to tell the version
Please check the version of the system working on your GT-100 before downloading the archive file.
1.
With the GT-100’s power off, hold down the [
EFFECT
] button and [
SYSTEM
]
button and then press and hold the POWER switch.
The left display will show the current version number at "Ver."
2.
Press and hold the POWER switch to turn off the power.
*Don't perform the update if the product is already up-to-date.
Update history
[ Version 1.06 ]
Bug Fixes
The following bugs Were fixed.
Some personal computers might not recognize the device connected with the USB
3.0 port.
Other USB equipments might not work when a personal computer rebooted with
connecting the device via the USB 3.0 port.
[ Version 1.04 ]
Functionality Improvements
Improved response of the Parameter knobs [1]-[8].
In Manual mode, the [ ACCEL/CTL ] and the [ PHRASE LOOP ] pedals can be used
for controlling parameters.
The indicator turns on and off with controlling a parameter by the [ PHRASE LOOP ]
pedal.
When you select the "SYSTEM" in the " SUB EXP " parameter of the [ SYSTEM ] -> [
PREFERENCE ] settings, the SUB EXP pedal's current position is set to the patch
setting with switching to other patch immediately.
Bug Fixes
The following bugs were fixed.
With "OMNI MODE = OFF" setting, MIDI control change messages could not control
parameters.
A noise mixed to a sound on the EXT LOOP SEND jack at switching a patch.
[ Version 1.03 ]
Bug Fixes
The following bugs were fixed.
The DRIVE parameter had wrong effect after changing a patch when you selected
the CUSTOM for a OD/DS type.
It might sound different from the selected patch, when you changed a patch at the
same BANK number between a preset patch and a user patch.
