Makeup Tools (rhythms and SMF)
Backing Keyboard BK-5
r
75
Chorus Type:
Chorus broadens the spatial image of
the sound and creates a stereo impression. You can
choose from 8 types of chorus.
Reverb Level & Chorus Level:
These parameters
allow you to modify the output level of the Reverb
(or Chorus) processor.
Rhythm Volume/Song Volume:
This parameter
allows you to set the overall volume of the selected
rhythm or song if you think it is too loud/soft.
Rhythm Tempo/Song Tempo:
Allows you to change
the rhythm’s or song’s tempo (
q
= 20~250).
Key:
This parameter allows you to transpose all song
parts (except the drums) up to 12 semitones (1
octave) up or down. This value is written to the song
data and used every time you play back this song.
NOTE
This parameter is not available for rhythms.
Undo Changes:
Select this entry to cancel all
“Rhythm/SMF Makeup Tools” settings you have made
and to revert to the previously saved version.
2.
If you are satisfied with your changes and
wish to preserve them, save your rhythm/
song to the USB memory.
See “Saving your new rhythm or song (SMF) version”
on p. 80.
NOTE
The changes you make using the procedure described
above can be “burned” into the rhythm/song file using the
“Freeze Data” command (see p. 79). Doing so will allow you
to hear those changes on any sequencer (software) you
use. Changes you don’t “freeze” are nevertheless stored
when you save the edited rhythm/song file—but only the
BK-5 can read them.
To edit the Instrument parameters, use [MENU] button
‰ “Makeup Tools” ‰ “Instrument”.
The display now shows all instruments used by the
selected rhythm or SMF song.
1.
Rotate the [CURSOR
÷
VALUE] to select the
instrument you want to change, then press
the [ENTER/SELECT] button.
The display changes to:
The [MENU] button’s indicator flashes.
2.
Press the [MENU] button to jump to the
location where the instrument is used.
Playback starts automatically from that point.
3.
Rotate the [CURSOR
÷
VALUE] dial to select
the parameter you wish to edit, then press
the [ENTER/SELECT] button.
Hall1,
Hall2
These types simulate the reverb of a small (1)
or large (2) concert hall and thus sound much
“bigger” than the Room types above.
Plate
This algorithm simulates the acoustics of a
concert hall.
Delay
A delay effect (no reverb). Works a lot like an
echo effect and thus repeats the sounds.
Pan Delay This is a stereo version of the above delay
effect. It creates repetitions that alternate
between the left and right channels.
Setting
Meaning
Original
The song uses its own (programmed)
chorus settings.
Chorus
1~4
These are conventional chorus effects
that add spaciousness and depth to the
sound.
Fbk Chorus
This is a chorus with a flanger-like effect
and a soft sound.
Flanger
This is an effect that sounds somewhat
like a jet airplane taking off and landing.
ShortDly
This is a full-fledged delay effect that
can be used instead of a chorus or
flanger. As you will see, there are a lot of
parameters you can program.
ShortDlyFb
This is a short delay with many repeats.
Setting
Meaning
BK-5_US.book Page 75 Monday, November 14, 2011 12:43 PM
Summary of Contents for BK-5
Page 1: ...r Owner s Manual BK 5_US book Page 1 Monday November 14 2011 12 43 PM ...
Page 148: ...Index 148 rBacking Keyboard BK 5 BK 5_US book Page 148 Monday November 14 2011 12 43 PM ...
Page 150: ...150 rBacking Keyboard BK 5 MEMO BK 5_US book Page 150 Monday November 14 2011 12 43 PM ...
Page 152: ...r 602 00 0527 01 RES 873 11 BK 5 OM E BK 5_US book Page 152 Monday November 14 2011 12 43 PM ...
