manualshive.com logo in svg

Roland Atelier Combo AT-350C, Owner'S Manual

Share
Download
Roland Atelier Combo AT-350C Owner'S Manual Download Page 92

92

Adjusting How the Instrument 

Responds

Adjusting the Volume of the Vintage Organ 

(VintageOrganVolume)

You can adjust the volume of the Vintage Organ sound to regulate the 

volume balance relative to the other sounds.

Value

Explanation

0–12

Increasing the value will increase the volume of 

the Vintage Organ sound.

Selecting the Parts to which Vibrato or 

Chorus will be Applied (Vibrato/Chorus Part)

For the vintage organ voices, you can choose the parts to which the 

vibrato or chorus effect (p. 34) will be applied.

Value

Explanation

UPPER+LOWER

The effect will be applied to the upper keyboard 

part and the lower keyboard part.

UPPER

The effect will be applied to the upper keyboard 

part.

LOWER

The effect will be applied to the lower keyboard 

part.

Adjusting the Initial Touch Sensitivity 

(Initial Touch)

This adjusts the amount of the Initial Touch effect applied. 

Initial Touch is a function that translates the force used in playing the 

keys into a directly proportional amount of volume.
This can be set separately for both the upper keyboard and lower 

keyboard.

Parameter

Value

Explanation

Upper, Lower

1–10

Initial Touch is ON. 
Striking the keys more forcefully will 

produce correspondingly louder sounds.
The change in volume when the keys are 

played forcefully increases as the value 

is increased.

OFF

Initial Touch is off. 
Volume remains constant regardless of 

how hard you play.

Turning Initial Touch Off (EZ Touch)

This allows you to perform at a consistent volume regardless of how 

strongly you play the keyboard.

Value

Explanation

OFF

Initial touch will be on.

ON

The volume will remain constant regardless of 

the force you use when playing the keyboard.
Initial touch will be off.

You can also use the following procedure to turn the EZ Touch function 

on.

1. 

Hold down the [Reset] button and press the Pedal [To Lower] 

button.

A message letting you know that the EZ Touch function has been 

turned on will be displayed for a few seconds.

2. 

To turn off the EZ Touch function, hold down the [Reset] 

button once again and press the Pedal [To Lower] button.

Changing How the Solo Voice Responds 

(Solo Mode)

When the Solo voice is assigned to the Upper keyboard or Lower 

keyboard, you can specify how the Solo voice will respond when more 

than one key is pressed.

Value

Explanation

TOP NOTE

The Solo voice will sound the highest note that 

is played for the Solo part.

LAST NOTE

The Solo voice will sound the note that was 

most recently played for the Solo part.

POLYPHONIC

The Solo voice will sound all notes that are 

played for the Solo part.

Layering the Solo Voice and Lower Voice 

(SoloToLower Mode)

When the Solo voice is being played by the Lower keyboard (i.e., when 

the Solo [To Lower] button is ON), you can specify whether the Lower 

voice and the Solo voice will sound together (layered), or will sound 

separately (split).

Value

Explanation

SPLIT

The parts will sound separately.

LAYER

The Lower voice and Solo voice will sound 

together.

Summary of Contents for Atelier Combo AT-350C





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands