Roland Atelier Combo AT-350C, Owner'S Manual

Page: 56 / 132

56
Performing with an Active Expression Voice
For “Active Expression Voices,” operating the expression pedal will control not only the volume but also the tone, or may add additional sounds.
MEMO
If you want to use an expression pedal, you’ll need to connect a pedalboard (PK series; sold separately) or an expression pedal (EV-7; sold separately)
(p. 26).
1. Press the [Others] button of the Part to which you want to assign an Active Expression voice.
The voice name appears in the display.
The indicator of the selected [Others] button will light.
* You can also use the Upper Organ part’s [Others] button to select an Active Expression voice, but the active expression effect won’t be applied.
2.
Press the Value [-] [+] buttons to select the Active Expression Voice.
The indicator of the selected [Others] button will blink.
Active Expression Voices have the letters “AEx” preceding their voice name.
To stop mid-way through this or any procedure, press the [Display/Exit] button.
3. Once again, press the [Others] button for the part whose sound you wish to set to confirm the voice.
The indicator of the [Others] button will change from blinking to light.
Example: selecting and performing the active expression voice
1. Select the Active Expression voice “AEx Strings.”
2. Depress the expression pedal.
As you further step down on the expression pedal, the sound will gradually change to a bright strings sound, and a strings sound one octave higher
will be added.
Adding Decay to the Sound (Damper Pedal)
You can use the hold switch of the pedalboard (PK series; sold separately) or a pedal switch (DP series; sold separately) to sustain the notes played on
the lower keyboard.
While you continue depressing the damper pedal, notes will be sustained even if you release the keys.
* Decay cannot be added to the Solo voices.
MEMO
Decay can not be applied to Pedal Bass voices played on the Lower keyboard (when the Pedal [To Lower] button indicator is lit or Bass Split function
is ON).