Roland Atelier Combo AT-350C, Owner'S Manual

Page: 41 / 132

41
Per
forming
Adding Reverberation to the Sound (Reverb Effect)
Reverb is an effect that adds a sense of spaciousness to the sound, creating the illusion of playing in a concert hall.
1. Press the Reverb [ ] [ ] buttons to adjust the overall Reverb amount.
When you press the Reverb [ ] button, additional Reverb is applied. Pressing the Reverb [ ] button decreases the Reverb level.
When you press the Reverb [ ] [ ] buttons, the Reverb level will be shown in the display.
Changing the reverb type
By changing the reverberations of the notes, you can enjoy the atmosphere of performance in a wide variety of different locations.
1.
Press the [Utility] button.
2. Press the Menu [ ] [ ] buttons to select “Reverb.”
3. Press the [Utility] button.
4.
Press the Menu [ ] [ ] buttons to select “Reverb Type.”
5. Press the Value [-] [+] buttons to select a Reverb type.
Type Explanation
ROOM 1
Reverberation of a small room
ROOM 2 Reverberation of a small club
ROOM 3 Reverberation of a large room
HALL 1 Reverberation of a large concert hall
HALL 2 Reverberation of a small concert hall
SMALL CHURCH
The reverberation of a small church
LARGE CHURCH The reverberation of a large church
CATHEDRAL The reverberation of a cathedral
PLATE A bright, metallic reverberation
DELAY An echo-like sound repeated several times
PAN DELAY
Similarly to the above but where the sound is panned between the left and right speakers
To return to the basic screen, press the [Display/Exit] button.