24
Before You Start Playing
Restoring All Settings Other
Than the User Memory to the
Original Factory Settings
You can restore all of the settings other than the User
memory (p. 62) to their original factory settings.
This function is called “Panel Reset.”
1.
Make sure there is no floppy disk in the disk
drive before carrying out the procedure.
2.
Touch <System> on the Main screen.
The System screen appears.
fig.00-37.eps
3.
In the System screen, touch <Utility> to open the
Utility screen.
fig.00-38.eps
4.
In the Utility screen, touch <Panel Reset>.
fig.00-39.eps
The confirmation message appears on screen.
fig.00-40.eps
If you touch <Cancel>, the Panel Reset will not be
performed, and you will return to the System screen.
5.
When you touch <OK>, the Panel Reset operation
will begin, and the settings will return to the
factory-set condition.
NOTE
Never switch off the power while this operation is in
progress!
fig.00-40.eps
NOTE
To reset only the User memory (p. 62) to its original factory
settings, refer to p. 80.
What is the User Memory?
The User memory is the area within the instrument
where User rhythms you create as well as rhythms from
Music Style Disks are stored.
You can also copy rhythms (p. 78) saved on floppy disks
to the User memory.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 24 ページ ２００４年９月８日 水曜日 午後５時４４分
Summary of Contents for Atelier AT-90SL
Page 1: ...04 9 3N 03676678...
Page 263: ...262 MEMO AT 90SL_e book 262...
Page 266: ...04 9 3N 03676678...
