Roland Atelier AT-90SL, Owner'S Manual

Page: 23 / 266

22
Before You Start Playing
About the Hole of the AT-
90SL’s Cabinet
To provide a way for cables to be passed from the front of the
instrument to its rear, a hole has been drilled in the AT-
90SL’s cabinet.
Avoid inserting fingers into this hole.
About the Bench
The bench seat can be opened, and sheet music and other
items can be stored inside.
Caution When Using the Bench
fig.00-31
When opening/closing the seat, be careful not to pinch your
fingers.
fig.00-36
Restoring All the Factory
Default Settings
You can restore all of the settings stored in the AT-90SL to
what they were when the instrument shipped from the
factory. This function is called “Factory Reset.”
1.
Make sure there is no floppy disk in the disk
drive before carrying out the procedure.
2.
Touch <System> on the Main screen.
The System screen appears.
fig.00-37.eps
3.
In the System screen, touch <Utility> to open the
Utility screen.
fig.00-38.eps
4.
In the Utility screen, touch <Factory Reset>.
fig.00-39.eps
To restore all settings other than the User memory (p. 62) to
their original factory settings, touch <Panel Reset>.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 22 ページ ２００４年９月８日 水曜日 午後５時４４分