Roland Atelier AT-90SL, Owner'S Manual

Page: 190 / 266

189
Chapter 10 Various Other Settings
■
Changing the Pitch Bend
Range
This setting allows you to choose the maximum amount of
Pitch change (range) permissible when using Pitch Bend. The
range can be set anywhere between 1–12 (in semitone units;
with a maximum of one octave).
1.
Touch <Sound/Kbd> on the Main screen.
The Sound/Keyboard screen appears.
2.
Touch <Controller>.
The Controller screen appears.
3.
Touch < >< > to display the Pitch Bend
Range.
4.
Touch the Pitch Bend Range setting.
5.
Touch < >< > to change the setting.
Settings 1–12 (semitone steps)
6.
Touch <Exit>.
NOTE
Drums/SFX is fixed at one octave range, regardless of this
setting.
Rhythm Settings
■
Turning Chord Hold On/Off
The Chord Hold function can be switched ON/OFF. When
Chord Hold is ON, the Automatic Accompaniment will
continue playing even when you lift your hand from the
keyboard to play a new chord.
1.
Touch <Rhythm> on the Main screen.
The Rhythm screen appears.
2.
Touch < > (Utility).
The Utility screen appears.
3.
Touch <Options>.
The Rhythm Options screen appears.
4.
Touch < >< > to display the Chord Hold.
5.
Touch the Chord Hold setting to switch between
“ON” and “OFF.”
Each time you touch the Chord Hold setting, it will
alternate between “ON” and “OFF.”
6.
Touch <Exit>.
Setting Descriptions
ON
The Automatic Accompaniment
determined by the chord played on the
Lower keyboard is held (even if you
release the keys).
OFF
When you release the keys that you
played in the Lower keyboard, the
Automatic Accompaniment will stop
(be muted). Only the Rhythm (drum)
performance will continue.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 189 ページ ２００４年９月８日 水曜日 午後５時４４分