Roland Atelier AT-90SL, Owner'S Manual

Page: 187 / 266

186
Chapter 10 Various Other Settings
■
Adjusting the Initial Touch
Sensitivity
Initial Touch is a function that translates the force used in
playing the keys into a directly proportional amount of
volume. This adjusts the amount of the Initial Touch effect
applied.
1.
Touch <Sound/Kbd> on the Main screen.
The Sound/Keyboard screen appears.
2.
Touch either <UPPER>, or <LOWER>.
3.
Touch < >< > to display the Initial Touch.
4.
Touch the Initial Touch value (OFF, 1–10).
5.
Touch < >< > to edit the value.
Setting OFF, 1–10
6.
Touch <Exit>.
■
Changing the Pedalboard
Polyphony
You can set the Bass Pedalboard to play simultaneous
multiple notes or single notes only.
1.
Touch <Sound/Kbd> on the Main screen.
The Sound/Keyboard screen appears.
2.
Touch <PEDAL>.
The Pedalboard screen appears.
3.
Touch < >< > to display the PedalBass
Mode.
4.
Touch the PedalBass Mode setting to switch
between “MONOPHONIC” and
“POLYPHONIC.”
Each time you touch the PedalBass Mode setting, it will
alternate between “MONOPHONIC” and
“POLYPHONIC.”
5.
Touch <Exit>.
UPPER
To change the initial touch setting of
the Upper part
LOWER
To change the initial touch setting of
the Lower part
Setting Descriptions
1–10
Initial Touch is on.
The harder you play the key, the higher
the volume.
The change in volume when the keys
are played forcefully increases as the
value is increased.
OFF
Initial Touch is off.
Volume remains constant regardless of
how hard you play.
Setting Descriptions
MONOPHONIC
Only single notes can be played.
POLYPHONIC Multiple notes can be played.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence
AT-90SL_e.book 186 ページ ２００４年９月８日 水曜日 午後５時４４分