Roland AT900 Music Atelier Owner'S Manual Download | Manualshive

Page: 249 / 300

background image

247

Connecting with External Device

Connecting with External Device

The ATELIER has an Aux/Drums Output jack and Bass Output
jack on the bottom of the instrument.
By using this Aux/Drums Output jack to connect external
speakers or audio set, you can sound the reverb
(reverberation) from the speakers. An external reverb unit can
also be connected and used to apply reverb.
By making connections to the Aux/Drums Output jacks or Bass
Output jack, you can output the drums or bass sounds
separately. This is convenient when you’ve connected the
ATELIER to a mixer so that the overall volume balance can be
adjusted on the mixer.

1.

Touch <System> on the Main screen.

The System screen appears.

fig.10-11.eps

2.

Touch <

><

> to display the Aux Out.

3.

Touch the Aux Out setting to switch between
“ON” and “OFF.”

Each time you touch the Aux Out setting, it will alternate
between “ON” and “OFF.”

4.

Touch <Exit>.

1.

Touch <System> on the Main screen.

The System screen appears.

2.

Touch <

><

> to display the Aux Out

Mode.

3.

Touch the Aux Out Mode setting.

fig.10-11.eps

4.

Touch <

><

> to change the setting.

5.

Touch <Exit>.

You can change the depth of Reverb for each part (p. 152).

This setting remains stored in memory even while power is
turned off.

Changing the settings when
external speakers are connected

Switching the Aux Out On/OFF

Switching the Aux Out Mode

Setting

Effects

AMBIENCE

Play the RSS reverb sound from the external
speakers
The reverb sound applied by the ATELIER will
be output.

TO
EFFECTOR

Connect an external reverb processor and
use it to apply the desired reverb.
The direct sound is output for applying
reverb.

SEPARATE

Use a connected mixer to adjust the volume
balance
Bass, drums, and other sounds will be output
separately.

ENSEMBLE

The accompaniment and rhythm will be heard
from external speakers, creating the sensation
that you’re playing with an orchestra
The sounds you play on the keyboard will be
heard from the ATELIER’s own speakers, and
the accompaniment will be heard from the
speakers that are connected to the Aux/
Drums Output connector.

AT-900_e.book 247 ページ２００７年９月７日　金曜日　午前８時４３分

«
...
247
248
249
250
251
...
»

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Reviews:

No comments

Related manuals for AT900 Music Atelier

Brand: Ewent Pages: 2

Brand: iDataLink Pages: 6

Brand: Unitech Pages: 3

Brand: Steelmate Pages: 14

Brand: Tracer Pages: 12

Brand: swissonic Pages: 32

Brand: A4Tech Pages: 9

vivosmart HR/HR+

Brand: Garmin Pages: 16

Brand: Samsung Pages: 14

Brand: Samsung Pages: 3

Brand: Samsung Pages: 22

Brand: Samsung Pages: 39

Brand: Samsung Pages: 37

Brand: Samsung Pages: 55

Brand: Samsung Pages: 56

Brand: Samsung Pages: 79

Brand: Samsung Pages: 80

Brand: Samsung Pages: 109

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands