Roland AT900 Music Atelier Page 213 Owner'S Manual Download

Page: 213 / 300

211

Various Other Settings

You can specify which keyboard will be affected when you
press the Damper (Sustain) pedal.

Touch <Sound/KBD> on the Main screen.

The Sound/Keyboard screen appears.

Touch <Controller>.

The Controller screen appears.

Touch <

> to display the Damper

Pedal.

fig.09-08.eps

Touch the Damper Pedal setting to switch
between “to UPPER” and “to LOWER.”

Each time you touch the Damper Pedal setting, it will
alternate between “to UPPER” and “to LOWER.”

Touch <Exit>.

Specify how the Expression Pedal will function when your
performance is being recorded and when ATELIER song files
are being played back.

Function During Recording

Specify whether Expression Pedal operations will be recorded
or not while your performance is being recorded.

Touch <Sound/KBD> on the Main screen.

The Sound/Keyboard screen appears.

Touch <Controller>.

The Controller screen appears.

Touch <

> to display the Exp. Src (Rec).

fig.09-10.eps

Touch the Exp. Src (Rec) setting to switch
between “PEDAL” and “COMPOSER.”

Each time you touch the Exp. Src (Rec) setting, it will
alternate between “PEDAL” and “COMPOSER.”

Touch <Exit>.

Performance Function Settings

Selecting the keyboard affected by the
damper pedal

Setting

Descriptions

to UPPER

The effect is applied to the voices played
on the Upper keyboard.

to LOWER

The effect is applied to the voices played
on the Lower keyboard.

Changing the Function of the
Expression Pedal

Setting

Descriptions

PEDAL

Expression Pedal movements will be
recorded. The previous recording will
be erased as new songs are recorded.

COMPOSER

Expression Pedal movements will not
be recorded. The previous data will
remain without being erased.

AT-900_e.book 211 ページ２００７年９月７日　金曜日　午前８時４３分

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands

Roland AT900 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands