Roland AT900 Music Atelier Owner'S Manual Download | Manualshive

Page: 186 / 300

background image

184

Recording/Playing Back What You Play

7.

Touch <Load>.

fig.07-31.eps

The selected performance data will be loaded into
internal memory.
For track assignments of SMF format performance data
loaded to the ATELIER, refer to p. 169.

8.

Select the panel settings needed for recording
the performance.

9.

Touch the <Bwd> button and <Fwd> button to
move to the measure at which you wish to
begin recording.

10.

In the Rec/Play screen, touch <Rec> to enter

recording-standby mode.

<Play> and unrecorded track buttons in the screen will
blink. The button indicators of tracks that are already
recorded will light.
Also, the panel [Rec] button indicator will light, and the
[Play/Stop] button will blink.

You can also enter recording-standby mode by pressing the
[Rec] button.

11.

Touch the Track button which you wish to

recording (button flashes).

12.

In the Rec/Play screen, touch <Play> to begin

recording.

As you record, the music file that was loaded into the
ATELIER will play back.

13.

In the Rec/Play screen, touch <Stop> to stop

recording.

The track button for which performance data has been
recorded will be lit.

You can also start and stop recording by pressing the
[Play/Stop] button.

The performance data you recorded can be saved on a USB
memory, “Favorites,” or floppy disk (p. 180).

Commercially sold music files can also be loaded into the
ATELIER, but for reasons of copyright protection, cannot be
saved in SMF format.

1.

Prepare the performance data whose tempo
you want to change.

If you’re using performance data from USB memory,
connect it to the external memory connector.
If you’re using performance data from a floppy disk,
connect the floppy disk drive to the Ext Drive connector,
and insert the floppy disk.

2.

Load the performance data into the unit

3.

Determine the tempo with the Tempo [

] [

]

buttons.

4.

Hold down the panel [Reset] button and press
the [Rec] button.

The tempo of the performance data will change.

You cannot carry out this operation with the <Reset> and
<Rec> in the Rec/Play screen.

Using Song with a Different Tempo
Than That of the Performance Song

NOTE

NOTE

AT-900_e.book 184 ページ２００７年９月７日　金曜日　午前８時４３分

«
...
184
185
186
187
188
...
»

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Reviews:

No comments

Related manuals for AT900 Music Atelier

TRAINING MONITOR

Brand: OARTEC Pages: 7

Casiotone MT-220

Brand: Casio Pages: 19

RUDDER ANGLE INDICATOR

Brand: VDO Pages: 8

Brand: BTC Pages: 1

Brand: Microsoft Pages: 7

Brand: Rajant Pages: 11

digital basics 2-in-1 air keyboard HQ

Brand: Digital Gadgets Pages: 11

Brand: Lenovo Pages: 1

Brand: ParaBody Pages: 4

Brand: Vaporesso Pages: 7

Brand: Omron Pages: 24

Brand: Garmin Pages: 62

Brand: ACME Pages: 52

Brand: ACME Pages: 52

Express Starter Kit

Brand: Jet Pages: 4

Brand: APRI Pages: 15

Brand: Seada Pages: 13

Brand: Goldtouch Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands