Roland AT900 Music Atelier Owner'S Manual Download Page 144

Page: 144 / 300

142

Applying Various Effects to the Sound

You can make fine adjustments to the speaker rotation speed
of the rotary effect (p. 141).

Touch <Sound/KBD> on the Main screen.

fig.05-08.eps

The Sound/Keyboard screen appears.

fig.VoiceList.eps

Touch <Effect>.

The Effect screen appears.

fig.05-17.eps

Touch <

> to display the Rotary Speed.

Touch the value setting buttons for Rotary
Speed to adjust the setting.

fig.05-12-2.eps

Touch <

> to edit the value.

Touch <Exit>.

These settings remain stored in memory even while the
power is off.

Making Fine Adjustments to the Rotary
Effect Speed (Rotary Speed)

Setting

SLOW, NORMAL, FAST

AT-900_e.book 142 ページ２００７年９月７日　金曜日　午前８時４３分

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Brands by name

Popular brands

Roland AT900 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Brands by name

Popular brands