Roland AT900 Music Atelier Owner'S Manual Download

Page: 126 / 300

124

Using the Registration Buttons

After saving registrations on USB memory, user memory, or floppy disk, you
can change the order or name of the registrations, or delete a registration (p.
122). This is very convenient when you are preparing to use the [Load Next]
button (Load Next function

→

p. 120) to recall successive registrations while

you play.

Prepare the registration(s) that you want to rename or sort.

If you want to rename or sort registrations saved on USB memory, connect
your USB memory to the external memory connector.

If you want to rename or sort registrations saved on a floppy disk, connect the
floppy disk drive to the external memory connector.

Touch <Registration> on the Main screen.

The Registration Load screen appears.

fig.03-05.eps

Touch <File>.

The Registration File Edit screen appears.

fig.03-25.eps

Changing the Name or Order of Registration

AT-900_e.book 124 ページ２００７年９月７日　金曜日　午前８時４３分

Summary of Contents for AT900 Music Atelier













































































































































































































































































































Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands

Roland AT900 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT900 Music Atelier

Reviews:

Related manuals for AT900 Music Atelier

Brands by name

Popular brands