87
Using Rhythm Performance
Using Rhythm Performance
Stopping with an Ending
1.
Press the [Ending] button.
An Ending is played, then the Rhythm stops.
While the Ending is playing, the [Ending] button indicator will light, until the
Ending finishes the button indicator will be turned off.
Stopping without an Ending
1.
Press the [Start/Stop] button.
The Rhythm stops without an Ending being played.
Making the Ending Short and Simple
1.
Press the Variation [1] button.
2.
Press the [Ending] button.
A short Ending is played, then the Rhythm stops.
You can change the tempo of the Rhythm or Automatic Accompaniment (p.
88).
fig.02-04.eps
1.
Press the Tempo [
] and [
] buttons to change the
tempo (speed) of the Rhythm or Automatic Accompaniment.
By pressing the Tempo [
] and [
] buttons simultaneously, the tempo is
returned to the standard (preset) tempo for the selected Rhythm.
The value of the tempo currently set (20–500 beats per minute) can be
checked in the screen.
Stopping the Rhythm
Changing a Rhythm’s Tempo
Tempo [
] button
The tempo becomes slower
Tempo [
] button
The tempo becomes faster
The functions of the [Intro]
button, [Ending] button and
[Start/Stop] button can be
assigned to the foot switches
located on each side of the
Expression Pedal (p. 134).
If “Auto Std Tempo” (p. 215) is
on, and you switch the Rhythm
while the Rhythm is stopped,
the tempo will automatically be
set appropriately for that
Rhythm.
If you switch Rhythms when
“Auto Std Tempo” is off, the
tempo remains unchanged even
when you switch the Rhythm.
You can confirm the tempo and
beat with the “bouncing ball” in
the Main screen (p. 29).
You can also use the [Value]
dial to change the tempo.
AT-800_e.book 87 ページ ２００８年１０月１５日 水曜日 午前９時３７分
