Roland AT800 Music Atelier Owner'S Manual Download

Page: 201 / 292

201

Creating Original Accompaniment Rhythms

Use the Rhythm Customize function to select the Rhythm you
want to use as the base for the Rhythm you are creating.

Bring up the Rhythm Customize screen (p.
199).

fig.RC-01.eps

Touch <

> (Utility).

The Utility screen appears.

fig.RC-02.eps

Touch <Load>.

The Rhythm Load screen appears.

fig.RC-05-1.eps

Touch Group/Media <

> <

> to select

Rhythm group.

fig.RC-06.eps

Touch <

> <

> to switch the screen, then

touch a Rhythm name to select the Rhythm.

fig.RC-05-2.eps

You can touch <Preview> to hear how the Rhythm
sounds.

Touch Division <

> <

> to select the

Division you want to call up.

Selecting “ALL” calls up all of the Divisions.

Use the Variation buttons of the panel to
change the arrangement of the
accompaniment.

Touch <Load>.

The Rhythm is called up, and the Rhythm Customize
screen returns to the display.

Loading the Rhythm

AT-800_e.book 201 ページ２００８年１０月１５日　水曜日　午前９時３７分

Summary of Contents for AT800 Music Atelier





































































































































































































































































































Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands

Roland AT800 Music Atelier, Owner'S Manual

Search results

Summary of Contents for AT800 Music Atelier

Reviews:

Related manuals for AT800 Music Atelier

Brands by name

Popular brands