manualshive.com logo in svg

Roland ARX-03 BRASS, Owner'S Manual

Share
Download
Roland ARX-03 BRASS Owner'S Manual Download Page 21

 

23

 

Creating a Patch

 

This screen is used mainly to select patches.
By changing the Player Select setting you can switch between 
playing the section (ALL) or playing a solo (1–6).

 

Patch Selection and Indicator

 

Move the cursor to PATCH Number/Name and change the value to 
select a patch (001–050).

 

fig.01-004.eps

 

The indicators show the following information.

*1 This setting cannot changed in the main screen. You can adjust 

this in “Playing settings (Section Style screen)” (p. 29)
These Parameters can be controlled using a specified controller 
(p. 39).

*2 This setting cannot changed in the main screen. You can adjust 

this in “Applying effects (Routing screen)” (p. 33)

About this manual

• The screen images used in this manual are taken from a Fantom-G with the ARX-03 installed. The various procedures described also 

assume that you are using the ARX-03 installed in a Fantom-G.

• For details on how to move the cursor or edit a value, refer to the owner’s manual for the device in which you’ve actually installed the 

ARX-03.

 

Main Screen

PATCH Number/Name

3

2

5

4

1

6 7

 

No.

Indicator

Description

 

1

L/R Level Indicator

Left/right levels of the sound

2

Player Indicator

The players that are currently playing will be lit

3

Section Group 
Indicator

The indicators will be lit at the same height for 
players in the same group

4

Section Play Mode 
Indicator

Play mode status *1

5

Variation Indicator

Performance variation status *1

6

MFX Switch

Turns the multi-effect on/off *2

7

Reverb Switch

Turns the reverb on/off *2

ARX-03_e.book 23 ページ ２００９年２月２６日　木曜日　午前９時６分

Summary of Contents for ARX-03 BRASS





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands