manualshive.com logo in svg

Roland Aproll MDX-540, User Manual, Page: 62 / 120

Share
Download
Roland Aproll MDX-540 User Manual Download Page 62

60

4-2  Installing a Tool

Installing a Tool (ZS-540TY)

WARNING 

Be sure to open the spindle cover before you perform this task. 

If it remains closed, unintended operation of the machine may lead to danger of 

entanglement. 

WARNING 

Never inadvertently touch the computer or handy panel while performing this 

task. 

Unintended operation of the machine may result in injury. 

WARNING 

Securely fasten the cutting tool and workpiece in place. After securing in place, 

make sure no wrenches or other articles have inadvertently been left behind. 

Otherwise such articles may be thrown from the machine with force, posing a risk 

of injury.

CAUTION 

Caution: cutting tool. 

The cutting tool is sharp. To avoid injury, exercise caution.

This explanation is for installation on the standard spindle (the ZS-540TY). 

Procedure 

Open the spindle cover. 

WARNING: Be sure to open the 

spindle cover. 

Fit the collet into the nut. 

Engage the tabs securely. 

Chapter 4  Getting Ready for and Performing Cutting

Summary of Contents for Aproll MDX-540

























































































































Reviews:

No comments