Roland Aproll MDX-540, User Manual

Page: 24 / 120

22
1-1 Introduction
Features

This is a three-axis modeling machine. Despite its compact size, it offers a wide work area and plenty of power. You can
get started cutting simply and easily, just by connecting it to your computer.

A dedicated CAM program is included as a standard feature.

AC servo motors are used for the X, Y, and Z axes. The software resolution (minimum unit of movement) is a high-resolution
1 µm (in the NC-code mode). Simultaneous three-axis control is possible.

An ATC unit and rotary axis unit (A -axis) can be installed, enabling you to cut complex shapes in a single procedure. When
the rotary axis unit is installed, simultaneous four-axis control is possible.

The LEGO-FIX (R) ER16-compliant spindle nose lets you make use of a wide variety of tooling systems.

The controller supports both RML-1 and NC codes, allowing you to use a wide range of software.

Often-used features are grouped together on the handy panel for easy operation. Also, detailed settings are made on the
computer. The display is large and designed for easy understanding.
Organization of the Documentation
The documentation for this machine is organized as described below. Read through the documents you need to ensure that
you get full use of the machine.
: Be sure to read this.
: Read as required.
MDX-540S/540
User's Manual (this document)
When installing the machine
When you want to learn about basic use
Roland Software Package
Software Guide
When connecting the machine to a computer
When you want to learn about the included program and
other software in detail
VPanel
Online Help
When making advanced settings for the machine
When you want to learn about the full range of features of
the machine
NC Code
Reference Manual
When performing NC-code programming
SRP Player
Installation and Setup Guide
When installing and setting up the included CAM program
When you want to learn how to use the included CAM pro-
gram
indicates online help that you view on your computer. For information on how to view it, see the following section.
The included program also comes with additional online help.
User's Manual for the ATC-equipped Models
The "ZAT-540 User's Manual" is included with the MDX-540SA and MDX-540A. That manual contains information on how to
set up and operate the ATC unit. Be sure to read it together with this manual.
Chapter 1 Introduction