Roland Aproll MDX-540, User Manual

Page: 117 / 120

8-3 Main Unit Specifications
Main Specifications
Main specifications when installed with the ZS-540TY spindle and the standard table.
The workpiece area, axis travel, and other such specifications may vary when optional items are installed.
MDX-540S MDX-540
Cuttable material Plastic resin and light metal
XYZ-axis travels X x Y x Z: 500 x 400 x 155 mm (19.6 x 15.7 x 6.1 in.)
Distance from spindle nose
to table
Maximum 254 mm (10 in.)
Table size
Width x depth: 550 x 420 mm (21.7 x 16.5 in.)
Loadable workpiece weight
At acceleration of 0.2 G: maximum 12 kg (26 lb.), 0.1 G: 20 kg (44 lb.),
0.05 G: 20 kg (44 lb.)
XYZ-axis drive system AC servo motor, 80 W AC servo motor, 60 W
Operating speed Maximum 7.5 m/min (295 in./min)
Acceleration 0.2 G, 0.1 G, 0.05 G
Software resolution RML-1 mode: 0.01 mm (0.0004 in.), NC-code mode: 0.001 mm (0.00004 in.)
Mechanical resolution 0.001 mm (0.00004 in.)
Positioning accuracy ±0.1 mm/300 mm (±0.004 in./12 in.), under no-load conditions
Repeat accuracy
±0.02 mm (±0.0008 in.),
under no-load conditions
±0.05 mm (±0.002 in.),
under no-load conditions
Origin reproducibility
(when the power is switched on/off)
±0.02 mm (±0.0008 in.) ±0.05 mm (±0.002 in.)
Spindle motor
DC brushless motor, maximum 400 W
Spindle speed
400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering
Tool chuck
Collet method, maximum tool diameter: 10 mm (0.4 in.)
Control command sets
RML-1 and NC codes
Interface
USB (compliant with Universal Serial Bus Specification Revision 1.1)
Power supply
Voltage and frequency: AC 100 to 120 V/220 to 240 V ±10%, 50/60 Hz
Required power capacity: 7 A (100 to 120 V)/4 A (220 to 240 V)
Power consumption Approx. 700 W
Acoustic noise level During operation (no cutting): 65 dB (A) or less, during standby: 40 dB (A) or less
Dimensions
Width x depth x height:
765 x 955 x 858 mm
(30.1 x 37.6 x 33.8 in.)
Width x depth x height:
745 x 955 x 858 mm
(29.3 x 37.6 x 33.8 in.)
Weight
102 kg (225 lb.)
Operating temperature
5 to 40°C (41 to 104°F)
Operating humidity
35 to 80% (no condensation)
Included items
Handy panel, power cord, tool sensor, sensor cable, nut, nut wrench, wrench, hexagonal
wrench, Roland Software Package CD-ROM, SRP Player CD-ROM, User's Manual, Roland
Software Package Software Guide, SRP Player Installation and Setup Guide, NC Code
Reference Manual
115
Chapter 8 Specifications