Roland 5100011346 -01 Owner'S Manual Download Page 70

Page: 70 / 120

Using the SD-50 as an SMF/Audio Player

You can register up to three songs as “favorites,” so they can later be instantly recalled at the press of a button.

Access the song list (p. 64).

fig.page_song_list.eps

Press the [FAVORITE] button for a number of seconds until the REGIST SONG screen appears.

page_regist_favorite.eps

Press one of the [PART](1) – [PLAYER](3) buttons.

Once the following screen appears, the studio set has been saved.

page_studioset_write.eps

Press the [FAVORITE] button.

The registered songs will be displayed, and the [PART](1) – [PLAYER](3) button LEDs will blink.

page_favorite.eps

Press one of the [PART](1) – [PLAYER](3) buttons.

The corresponding favorite song will be selected.

Selecting Favorite Songs (FAVORITE)

Registering a Favorite Song

Selecting a Favorite Song

SD-50_e.book 70 ページ２０１０年１月２５日　月曜日　午前１０時５２分

Summary of Contents for 5100011346 -01

























































































































Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands

Roland 5100011346 -01, Owner'S Manual

Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands