Roland 5100011346 -01 Owner'S Manual Download Page 40

Page: 40 / 120

Using Playlist Editor

You can create playlists for playing SMFs or audio files on the SD-50 using the Playlist Editor.

When using the SD-50 to play backing tracks (accompaniment), it’s convenient to create a playlist that specifies the
desired order for the songs.

For details on using this, refer to the PDF manual that is installed together with Playlist Editor.

The procedure for installing Playlist Editor will depend on your system.

Insert the included DVD-ROM into your DVD-ROM drive, and double-click the [Setup.exe] file

located in the Editor folder.

A user account control dialog box will appear; click [Continue].

The installer will start up. Follow the instructions that appear on the screen to install Playlist

Editor.

Insert the included DVD-ROM into your DVD-ROM drive, and double-click the [Setup.exe] file

located in the Editor folder.

The “Welcome” screen will appear. Click [Next].

Follow the instructions that appear on the screen to install Playlist Editor.

On the included DVD-ROM, open the Editor folder and double-click [Playlist Editor Installer.pkg].

The installer will start up. Follow the instructions that appear on the screen to install Playlist

Editor.

Installing Playlist Editor

Windows 7 / Windows Vista users

Windows XP Users

Mac OS X Users

SD-50_e.book 40 ページ２０１０年１月２５日　月曜日　午前１０時５２分

Summary of Contents for 5100011346 -01

























































































































Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands

Roland 5100011346 -01, Owner'S Manual

Search results

Summary of Contents for 5100011346 -01

Reviews:

Related manuals for 5100011346 -01

Brands by name

Popular brands