MK715x1EK1A Hardware Manual
1.
Overview
FEXK715x1EK1A_HardManual-01
1
1. Overview
1.1 Handling precautions
・
MK715x1EK1A/MK715x1EK1AP can be used only for evaluating MK715x1. We do not take any responsibility
for any direct or indirect damage caused by installing this product in your product.
・
We are not responsible for any modification or illegal use of this development kit.
1.2 Main features of MK715x1EK1A/MK715x1EK1AP
This evalution kit has access to all I/O and interface via connectors, and has user programmable 4 LEDs and 4
buttons. This evalution kit is compatible with Arduino Uno R3(Rev.3) and alllows the use of third paty Arduino Uno
R3 compatible shields. This evaluation kit is a great strating point for developing almost any Bluetooth
®
5.X Low
Energy application.
⚫
Easy power supply by USB connection
⚫
Coin battery(CR2032) holder
⚫
Arduino Uno R3 compatible connector that can use a third party shield
⚫
All I/O and interfaces can be accessed via connectors
⚫
4 LEDs, 4 push buttons, 4 bit DIP-SW and reset button can be used
⚫
Current measurement pin
⚫
Connector for high frequency(RF) measurement
⚫
External NFC antenna terminal(valid for MK71521EK1A/MK71521EK1AP only)
⚫
Virtual COM port
Top View
Bottom View
Fig. 1-1 : MK715x1EK1A appearance
