MK715x1EK1A Hardware Manual
3. How to use sample software
FEXK715x1EK1A_HardManual-01
1 4
3.
How to use sample software
The AT command application software is installed in this kit. Please prepare MK715x1 evaluation kit and
smartphone application "BLE Tool". This section briefly describes the operation of the AT command application,
using the MK715x1 side as a peripheral device and connecting to a central device such as a smartphone as an
example.
Fig. 3-1 :
System configuration (when connecting to a smartphone, etc.)
Refer to "MK715x1 AT Command Application User's Manual" for detailed specifications of AT command application
for MK715x1.
3.1 PC set up
1) Connect MK715x1EK1 and the USB port of your PC with USB cable(A-microB type).
When using it for the first time, USB serial conversion IC driver should be installed.
Download driver software from the following site, if necessary.
https://www.ftdichip.com/Drivers/VCP.htm
2) Start up terminal software such as Tera Term, and set the serial port as follows:
Port
：
COM port number used
Baud Rate
：
57,600 bps
Data
：
8 bit
Parity
：
None
Stop
：
1 bit
Flow Control
：
Hardware
3.2 Smartphone Set up
The application on the smartphone uses BLE Tool. Please download and install from the following.
Google Play :
https://play.google.com/store/apps/details?id=com.lapis_semi.bleapp
App Store :
https://itunes.apple.com/jp/app/ble-tool/id915714158?mt=8&ign-mpt=uo%3D4
MK715x1
Evaluation-kit
Remote Device
(Central Device)
Local Device
(Peripheral Device)
Bluetooth
low energy
USB-Serial
HOST
(PC)
