Assembly | 5
DURO-A RC
23 / 48
4.2
Tapped Holes for Transport Purposes
Size of chuck
Size of tapped holes for
transport purposes
180
M6
215
M8
260, 315, 400
M12
5
Assembly
WARNING
Injuries due to insufficient securing on assembly, incorrect
tightening torque of the screws.
Crushing due to falling of the power chuck.
Ø
Use tapped holes for transport purposes.
Ø
Observe tightening torque of the screws.
Ø
Wear personal protective equipment.
WARNING
Crushing injuries and cuts due to start-up of the machine dur-
ing set-up work.
Flying parts may cause serious injuries.
Ø
Disconnect the power supply before assembly.
Ø
Protect the machine against being re-started.
Ø
Wear personal protective equipment.
