Rohm BD868 0MUF-C Series, User Manual

Page: 8 / 35

8/35
User ’ s Guide
© 2022 ROHM Co., Ltd.
No. 65UG013E Rev.001
July 2022
SAFETY PRECAUTIONS
Caution: This evaluation board may only be used by authorized personnel that
is properly trained in recognizing and dealing with the dangers of testing high
voltage equipment and generally experimenting with high voltage circuits. This
board should only be used in a lab facility properly equipped for the safe testing
of power electronic systems at the relevant voltage levels. Failure to comply may
result in damage to equipment, personal injury or death.
Warning: This evaluation board contains DC bus capacitors which take time to
discharge after removal of the power supplies. Before working on the evaluation
board wait after deactivating all connected power supplies to ensure that the
capacitors have discharged.
Warning: Before disconnecting, connecting or reconnecting wires or
measurement probes to the board or before touching the board or performing any
manipulations on the board ensure that all external power is removed or
disconnected from the board and ensure the capacitors have discharged. Failure
to do so may result in damage to equipment, personal injury or death.
Caution: Some component surfaces on the evaluation board may become hot
during testing and remain hot for a certain time after turn-off. Take appropriate
measures while handling the board after use. Failure to do so may cause
personal injury.
Caution: Incorrect connection of power supplies or loads can damage the
board. Carefully review the information in this document.