Rohm BD868 0MUF-C Series, User Manual

Page: 23 / 35

23/35
User ’ s Guide
© 2022 ROHM Co., Ltd.
No. 65UG013E Rev.001
July 2022
Figure 16: Read/write register buttons
6.4.1. Read register
Any register can be read by
pressing the “Read all” button highlighted in the figure
Fehler! Verweisquelle
konnte nicht gefunden werden. or by using the
“Read” button that is part of each register row in the GUI.
The hexadecimal value will be displayed in the “Value” box. The single bit indication will be updated in
the register map area as well.
Figure 17: Register value visualization
If read action fails, the
status next to the address will show the message “Error”.
Select PMIC
or EEPROM