1/2
© 2017 ROHM Co., Ltd.
No. 60UG060E Rev.001
E Rev.001
JAN.2018
User’s Guide
Temperature Sensor
BD1020HFV-EVK-001 Manual
BD1020HFV-EVK-001 is an evaluation board for BD1020HFV, which is a ROHM Temperature Sensor. This User’s Guide is about how to use
BD1020HFV-EVK-001 together with SensorShield*
1
. *1 SensorShield is sold as Shield-EVK-001.
-002.
Preparation
Arduino Uno
1pc
Personal Computer installed Arduino IDE
1pc
Requirement : Arduino 1.6.7 or higher
Please use Arduino IDE which can be
downloaded from the link below:
http://www.arduino.cc/
USB cable for connecting Arduino and PC 1pc
SensorShield
1pc
BD1020HFV-EVK-001
1pc
Setting
1.
Connect the Arduino and the SensorShield (Figure 1)
Figure 1. Connection between the Arduino and the
SensorShield
2.
Connect BD1020HFV-EVK-001 to the socket of Analog
area on the SensorShield (Figure 2)
3.
Set Voltage of the SensorShield to 3.0V or 5.0V (Figure 2)
Figure 2. Connection between BD1020HFV-EVK-001 and
the SensorShield
4.
Connect the Arduino to the PC using a USB cable
5.
Download BD1020HFV.zip from the link below:
http://www.rohm.com/web/global/sensor-shield-support
6.
Launch Arduino IDE
7.
Select [Sketch]->[Include Library]->[Add.ZIP library...],
install BD1020HFV.zip
8.
Select [File]->[Examples]->[BD1020HFV]->[example]->
[BD1020HFV]
USB connecter
SensorShield