35 / 191 - EN -
3.6.
Protective equipment
3.6.1.
General safety information
DANGER
Risk of personal injury and property damage!
Note that the machine may only be operated with functional protective equipment:
⇒
Removing, changing or bypassing the protective devices is prohibited.
⇒
Operation without functioning protective devices is prohibited.
3.6.2.
Injury protection (safety ring)
3.6.3.
Motor overload protection (motor protection switch)
General safety information:
DANGER
Risk of personal injury and property damage!
Unplug the power plug from the outlet and always rectify the cause of the shutdown.
Description:
If the drive motor of the pugmill is subjected to excessive loads due to the mixture being too dry or the mixing shaft
being blocked (by foreign objects), the motor overload protection is triggered and the integrated motor protection
switch switches off the drive motor.
Note
:
The machine cannot be switched on again for at least 3 minutes after it has been switched off. This is necessary so
that the drive motor has enough time to cool down to its operating temperature again after the overload.
Attention
:
The machine will not turn itself back on automatically and unexpectedly. To switch the machine on again, the green
On button must be pressed after the fault has been rectified.
The safety ring prevents the operating personnel from accessing the
pugmill while it is in operation. If the red safety ring on the filling shaft of
the mixing barrel is pressed down, the pugmill switches off immediately.
Note:
To switch the machine on again, the green ON button must be pressed
after the fault has been rectified.
Summary of Contents for TS 20
Page 194: ...20220224 01 ...
