Rohde ST 630, Operation Manual

Page: 58 / 344

56 / 341 - EN -
2.5. Plug pin assignment (ROHDE default)
2.5.1. CPC 14 connector (ST 630 only)
Single and multi-zone kilns without additional switch outputs (events) are connected by a CPC 14 connector.
Pin no. X = Used Description Pin assignment
1 X Thermocouple 1 +
2 X Thermocouple 1 -
3
X
Thermocouple 2 +
4
X
Thermocouple 2 -
5
X
Thermocouple 3 +
6
X
Thermocouple 3 -
7 X Zone 2 switch output
8 X L1 feed 230 V AC
9 X N feed
10
X
Zone 3 switch output
11
X
PE feed
12 X Safety contactor switch output
13 X Neutral conductor switch output
14 X Zone 1 switch output
Note:
•
Each switch output can switch a maximum of 500 mA at 230 V.
•
The wiring of the mating CPC 14 socket can vary between kiln manufacturers!
• Non-observance can result in damage to the controller and kiln.
2.5.2. CPC 19 connector (ST 632 only)
Multi-zone kilns with additional switch outputs (events) are connected by a CPC 19 connector.
Pin no. X = Used Description Pin assignment
1 X Thermocouple 1 +
2 X Thermocouple 1 -
3 X Thermocouple 2 +
4
X
Thermocouple 2 -
5
X
Thermocouple 3 +
6
X
Thermocouple 3 -
7 X Zone 2 switch output
8 X L1 feed 230 V AC
9 X N feed
10 X Zone 3 switch output
11 X PE feed
12 X Safety contactor switch output
13 X Neutral conductor switch output
14 X Zone 1 switch output
15
X
Additional switch output No. 1 (230 V)
16
X
Additional switch output No. 2 (230 V)
17 - Not used
18 - Not used
19 -
Not used
Note:
• Each switch output can switch a maximum of 500 mA at 230 V.
•
The wiring of the mating CPC 19 socket can vary between kiln manufacturers!
•
Non-observance can result in damage to the controller and kiln.