102 / 136 - EN -
WARNING
Risk serious personal injury or property damage due to overloading of the ELS kiln floor.
⇒
Never exceed the maximum load weight of 40 kg per 100 litres of kiln volume!
⇒
Please note the information on loading the ELS kiln floor in the following section!
8.10.
Operating the air supply slide
There is a handle on the front of the ELS kiln floor that operates the air supply flap. Pull out the handle or push in the
handle to open or close the air supply flap.
Figure 15: Air supply slide
8.11.
Operating the exhaust air flap handle
Figure 16: Exhaust air flap handle
The handle for operating the exhaust air flap is located on the front of the kiln
in the upper left corner.
Pull out the handle or push in the handle to open or close the exhaust air flap.
INFORMATION
Note that leaving the exhaust air opening open up to
approx. 600-700°C can considerably increase the service
life of the heating elements.
Summary of Contents for ELS 1000 S
Page 136: ...135 136 Notizen Notes ...
Page 137: ...136 136 Notizen Notes ...
Page 138: ...20210521 01 ...
