R&S ZVL
GUI Reference
Trace Menu
Operating Manual 1303.6580.32-06
136
•
Couple All
assigns all traces to the channel or scale settings selected in the corresponding drop-
down lists. All channel or scale settings except the selected ones are lost. The analyzer displays a
confirmation dialog box before deleting the unused channels.
Remote control:
–
Sort Table
Changes the order of the traces (table rows) in the
Trace Manager
dialog.
•
The drop-down list contains all trace properties that can provide the sorting criterion. The
properties correspond to the column headers in the
Trace Manager.
•
The two radio buttons qualify whether the traces in the table are sorted in ascending or
descending order, according to the property selected in the pull-down list.
Remote control:
No command, display configuration only.
Trace Statistics
Opens a submenu to evaluate and display statistical and phase information of the entire trace or of a
specific evaluation range.
•
Min/Max/Pk-Pk
displays or hides the essential statistical parameters of the trace in the selected
evaluation range
.
•
Phase Delay/El Length
displays or hides the phase delay and the electrical length of the trace in
the selected evaluation range
(Eval Range...).
•
Mean/Std Dev
displays or hides the arithmetic mean value and the standard deviation of the trace
in the selected evaluation range
.
•
RMS
displays or hides the RMS value of the trace in the selected evaluation range
.
