Preface
R&S
®
ZND
8
Getting Started 1316.2407.02 ─ 52
2
Preface
This chapter provides safety-related information, an overview of the user documenta-
tion and the conventions used in the documentation.
2.1
Documentation Overview
This section provides an overview of the R&S
ZND user documentation. Unless speci-
fied otherwise, you find the documents on the R&S
ZND product page at:
●
https://www.rohde-schwarz.com/manual/ZND
2.1.1
Getting Started Manual
Introduces the R&S
ZND and describes how to set up and start working with the prod-
uct. Includes basic operations, typical measurement examples, and general informa-
tion, e.g. safety instructions, etc.
A printed version is delivered with the instrument. A PDF version is available for down-
load on the Internet.
2.1.2
User Manual and Help
The user manual contains the description of all instrument modes and functions. It also
provides an introduction to remote control, a complete description of the remote control
commands with programming examples, and information on maintenance, instrument
interfaces and error messages. Includes the contents of the getting started manual.
The contents of the user manual are available as help in the R&S
ZND. The help offers
quick, context-sensitive access to the complete information for the instrument and its
firmware.
The user manual is also available for download or for immediate display on the Inter-
net.
2.1.3
Service Manual
Describes the performance test for checking the rated specifications, module replace-
ment and repair, firmware update, troubleshooting and fault elimination, and contains
mechanical drawings and spare part lists.
The service manual is available for registered users on the global Rohde
&
Schwarz
information system (GLORIS):
●
Documentation Overview
