Operating the Instrument
R&S
®
ZND
42
Getting Started 1316.2407.02 ─ 52
left = bidirectional R&S
ZND
right = unidirectional R&S
ZND
The R&S
ZND generates a new trace for the selected S-parameter.
Alternative control elements
To measure a different quantity, select TRACE – [MEAS]. Drag and drop a softkey rep-
resenting a measured quantity to create a trace. Or simply select another softkey to
change the measured quantity of the active trace.
Select TRACE – [TRACE
CONFIG] to access more trace handling functions. Select
SYSTEM – [DISPLAY] to access more diagram handling functions.
5.4.2
Adding New Markers
A marker is needed, for instance, to read a particular numerical trace value.
To add a new marker:
●
Drag and drop the "New Marker" icon from the toolbar to the desired position in the
target diagram.
The marker appears on the target diagram's active trace. The marker info field dis-
plays the stimulus value (x-axis value) and response value (y-axis value) at the
marker position. The response value varies as the analyzer continues performing
sweeps.
Handling Diagrams, Traces, and Markers
