Rohde & Schwarz ZNB20 User Manual Download

Page: 965 / 1332

Command Reference

R&S

ZNB/ZNBT

950

User Manual 1173.9163.02 ─ 38

Example:

*RST; :CONF:TRAC:NAME?

Reset the instrument, creating a default channel no 1 and a
default trace Trc1.

CALC:PAR:DEF:SGR 1,2

Create four traces to measure the two-port S-parameters S

, S

. The traces are not displayed.

MMEM:STOR:TRAC:CHAN 1, 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\Traces\Chn1.csv'

Store all trace data of channel 1 to a trace file.

MMEM:STOR:TRAC:CHAN 1, 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\Traces\Chn1.s2p'

Store the four S-parameter traces to a two-port Touchstone file.
The Touchstone file will not contain the default trace Trc1.

Usage:

Setting only

Manual operation:

See

"Save"

on page 512

MMEMory:STORe:TRACe:OPTion:PLUS

<arg0>

This command defines how positive numbers are prefixed during Touchstone file
export: by a leading space, a plus sign or not at all.

Parameters:

<arg0>

SPACe | PLUS | VOID

Manual operation:

See

" Positive Number Prefix "

on page 612

MMEMory:STORe:TRACe:OPTion:SSEParator

This command defines whitespace insertion during Touchstone file export.

If set to ON, separator lines are skipped, i.e. the content parts are no longer separated
by blank lines.

Parameters:

Manual operation:

See

" Skip Separator Lines "

on page 612

MMEMory:STORe:TRACe:OPTion:TABS

This command defines whitespace insertion during Touchstone file export.

If set to ON, columns are separated by tabs rather than spaces.

Parameters:

Manual operation:

See

" Use TAB (instead of blanks) "

on page 611

SCPI Command Reference

Summary of Contents for ZNB20





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZNB20

Reviews:

Related manuals for ZNB20

Brands by name

Popular brands

Rohde & Schwarz ZNB20, User Manual

Search results

Summary of Contents for ZNB20

Reviews:

Related manuals for ZNB20

Brands by name

Popular brands