GUI Reference
R&S
®
ZNB/ZNBT
513
User Manual 1173.9163.02 ─ 38
5.12.8.3
Select Parameter Dialog
The "Select Parameter" dialog provides a selection of measurement results (e.g. S-
parameters) or traces, e.g. for trace import, import of power correction coefficients, limit
line import.
Access:
The dialog may be called from several dialogs, for example on pressing
Select All / Deselect All
During trace data import, selects/deselects all traces contained in the opened trace file.
Auto Distribute
Available for trace data import only.
If checked, a selected trace S
ij
is imported as a memory trace for all data traces in the
current recall set that are measuring S
ij
.
Remote command:
5.12.8.4
Select Ports Dialog
The "Select Ports" dialog defines the port assignment for the created Touchstone
(
*.s<n>p
) file.
Access:
TRACE – TRACE CONFIG > "Trace Data" > "snp Free Config""..."
Touchstone files and file export
Note the conditions described in
"Conditions for Touchstone file export"
Trace Config Softtool
