GUI Reference
R&S
®
ZNB/ZNBT
478
User Manual 1173.9163.02 ─ 38
Ref Pos
Defines the position of the reference line in a Cartesian diagram.
The reference line is indicated by a symbol at the right edge of the diagram area. The
color of the symbol corresponds to the trace color. "Ref Pos"is defined on a linear
scale between 0 (bottom line of the diagram) and 10 (top line of the diagram). As the
"Ref Pos" is varied, the value of the reference line ("Ref Value") is left unchanged, so
the current trace is shifted together with the "Ref Pos".
"Ref Pos" is not available (grayed) for polar diagrams ( "Polar" , "Smith" , "Inv Smith" ).
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:Y[:SCALe]:RPOSition
Max / Min
Define the upper and lower edge of a Cartesian diagram.
"Max" and "Min" are not available (grayed) for polar diagrams ( "Polar" , "Smith" , "Inv
Smith" ).
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:Y[:SCALe]:TOP
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:Y[:SCALe]:BOTTom
5.11.2 Scale Coupling Tab
Selects common scale settings for all traces. The softkeys are available if the active
recall set contains at least two traces, and if the active trace is not a reference trace
("To Trace").
Related settings
Refer to
Chapter 5.12.1.3, "Trace Manager Dialog"
Scale Softtool
