GUI Reference
R&S
®
ZNB/ZNBT
278
User Manual 1173.9163.02 ─ 38
Step 2: Connectors and Cal Kits
Selects the connector type and gender for all ports and allows you to import a calibra-
tion kit.
Background information
Refer to
Chapter 4.5.2, "Calibration Standards and Calibration Kits"
Messages in the dialog
An information (or error message) is displayed if one of the following happens:
●
One of the selected calibration kits is described by ideal kit parameters or typical
values.
●
One of the selected calibration kits does not contain all standards that are required
for the previously selected calibration type.
●
Different connector types are defined at the ports but the selected calibration type
requires uniform connectors.
●
A cal kit standard does not cover the entire calibrated frequency range.
The layout of the main panel depends on the number of test ports available:
Figure 5-11: Calibration Presetting Wizard, Step 2: Connectors and Cal Kits
Cal Softtool
