Rohde & Schwarz TSME-Z3, Getting Started

Page: 20 / 36

System Description
R&S
®
TSME-Z3
4 Getting Started 1519.0994.02 ─ 02
2.1 Backpack Contents
Risk of physical impairment due to heavy backpack
A fully equipped backpack can weigh over 8 kg (see data sheet). Beware of
this heavy load when carrying the backpack to avoid any risks to your
health.
The R&S TSME-Z3 backpack consists of:
●
A frame based on the HPRC 3500 backpack, with a carrying handle, ergo-
nomic shoulder straps, and a waistband
●
A system unit with:
– Power management (see
chapter 2.3, "Power Supply" , on page 6)
– Framework to mount up to three measurement devices (R&S
TSMEs or
mobile devices) side by side and up to two R&S TSMEs on top of each
other with the appropriate mounting material (see chapter 2.4, "Scanner
and Mobile Device Configuration" , on page 8)
– Framework to mount up to two optional recharcheable batteries (acces-
sory, see chapter 2.3, "Power Supply" , on page 6)
– Gigabit Ethernet switch (4 DL ports) for R&S
TSME connection (see "Con-
nectors for R&S TSME (Ethernet switch)" on page 9)
– USB 2.0 hub (6 DL ports) for mobile device control (see "Connectors for
mobile devices (USB hub + ports)" on page 9)
– Status LEDs (see chapter 4.1, "Status LEDs" , on page 19)
●
Two built-in cooling fans, connected to the system unit
●
DC power supply cable with a cigarette-lighter plug (see chapter 2.3, "Power
Supply" , on page 6)
Additionally required equipment
The system requires a DC power supply - either external or from optional
rechargeable batteries (see
chapter 2.3, "Power Supply" , on page 6).
The R&S TSMEs and mobile devices are controlled via a LAN cable (R&S TSME)
and a USB cable (mobile devices) from a suitable R&S ROMES control PC.
Backpack Contents