manualshive.com logo in svg

Rohde & Schwarz TSME DC Series, Manual

Share
Download
Rohde & Schwarz TSME DC Series Manual Download Page 18

Instrument tour

R&S

®

TSMExxDC

18

Manual 4901.1040.02 ─ 04

DC In connector

The DC IN connector is required for the DC power supply (10-28

 

V, max. 1.8

 

A).

For details, see 

Chapter 3.2, "Connecting to power"

, 

on page 10.

RF In 

≤

 6 GHz (SMA connector)

The frequency range RF bypass input (SMA connector) supports measurements
below 6 GHz. For details, see 

"To connect RF cable (SMA connector)"

on page 12.

RF In (2x), R&S

 

TSME30DC (K connector)

The frequency range downconverter inputs 1 and 2 (K connector) support differ-
ent input frequency ranges (mm waves).

●

24 GHz to 27.5 GHz

●

27 GHz to 30 GHz

For details, see 

"To connect RF cable (K connector)"

 

on page 12.

RF In (1x), R&S

 

TSME44DC (K connector)

The frequency range downconverter input (K connector) supports the input fre-
quency range from 24 GHz to 44 GHz (mm waves).

For details, see 

"To connect RF cable (K connector)"

 

on page 12.

Rear panel view

Summary of Contents for TSME DC Series
































Reviews:

No comments

Brands by name

Popular brands

Load more brands