Commissioning
R&S
®
TS-PWA3
41
User Manual 1157.8143.12 ─ 17
4.4.2
Connections at the Rear
Figure 4-1: Rear Connections without Option
1 = Knockouts for system and user-specific connections
2 = Analog bus connections
3 = Power connection
4 = Slots for Rear I/O modules
5 = System module
In its basic configuration, the R&S TS-PWA3 only has the power connection (3), the
analog bus connection (2) and the connector for the system module (5). All other con-
nections are system and user-specific.
System-specific connectors (e.g. D-sub) can be installed at the back of the R&S TS-
PWA3 (1). You will find more details in Section 4.5, Cabling.
Connections
