Description
R&S
®
TS-PWA3
35
User Manual 1157.8143.12 ─ 17
The User CAN Controller can be operated via the RSCAN SW module.
3.4.6
Driver Software
The local microcontroller is triggered by the CAN1 bus and the R&S-specific protocol.
The following software modules are installed during R&S GTSL installation:
●
RSCAN
●
RSPSYS
The CAN2-bus can be used for the customer specific implementations with help of the
RSCAN functions.
3.4.7
Self-Test
The module R&S TS-PSYS1 has no built-in self-test capability. The function of the
internal CAN bus can be checked with the local CAN node.
3.5
Function Description
The functionality of the R&S TS-PWA3 depends essentially on the installed plug-in
modules and the related software. The R&S TS-PWA3 is basically suitable for all types
of production tests.
An adapter interface can be flange-mounted to the front of the R&S TS-PWA3 for the
rapid and high-pole adaption of test devices (see
)
3.6
Permitted Module Configuration
Because of the different properties of plug-in modules, there are restrictions on the use
of plug-in slots.
Figure 3-18 shows an overview of which modules can be operated in which plug-in
slots.
Permitted Module Configuration
