Rohde & Schwarz SpycerNode SC, User Manual

Page: 8 / 108

General
Appropriate Use
SpycerNode SC
8
User Manual | 2902.5569.01 - 03
Appropriate Use
The R&S system may only be used according to its intended function. Any
other use or extension of this function is considered inappropriate. Inappro-
priate use may lead to situations resulting in personal injury or property
damage.
General
SpycerNode SC has been built according to the applying safety regulations.
To correctly use the R&S system heed the following:
●
To minimize the possibility of a faulty operation of the device you must
have access at all times to all manuals and guides at the operation site.
Before installing and/or using the R&S system it is strongly recom-
mended to read the manuals and follow the instructions.
●
The hardware of the R&S system works with voltages that can be
hazardous to your health. Never work on the system or access its interior
with the power cable(s) being plugged in. Make sure the power supply is
disconnected from the components you intend to work on.
●
Computer hardware contains components that are sensitive to electro-
static discharge. If you touch them without precautionary measures, they
can be destroyed. Use a wrist strap connected to ground when
accessing electronic parts and take care of grounding the system. Avoid
touching the internal components of the R&S system whenever possible.
●
Computer hardware contains components that are sensitive to changing
voltages. Connecting or disconnecting the R&S system to or from periph-
eral hardware while any of them is switched on may damage the hard-
ware. Switch off all peripheral hardware before connecting or
disconnecting anything.
●
Use, store and transport the R&S system only in compliance with the
technical data laid out in chapter "Appendix" on page 99.
●
If fluids or solid objects get inside the casing, the R&S system must be
disconnected from the power supply immediately. Before using the
system again, it has to be checked by authorized service personnel.
●
Only use a damp tissue without any cleaning agents to clean the casing.
●
The R&S system must not be misused, abused, physically damaged,
neglected, exposed to fire, water or excessive changes in the climate or
temperature, or operated outside maximum rating.
Inappropriate use
If the R&S system is not used in compliance with the safety instructions,
the warranty and all resulting liability claims will be void.
Carefully read the following safety instructions before attempting any
installation and/or performing any work on the system hardware