Rohde & Schwarz SpycerNode SC, User Manual

Page: 6 / 108

General
About this Documentation
SpycerNode SC
6
User Manual | 2902.5569.01 - 03
About this Documentation
This documentation describes how to use the hardware of SpycerNode SC,
a storage system by Rohde & Schwarz. It contains installation, operation and
maintenance instructions as well as safety instructions which must be
followed by the client company and the system operator. For this reason, the
manual should always be accessible in the immediate vicinity of the system.
Required Reading
The client company and operator of the system are advised to read this
manual, and to follow the instructions.
Each person who is responsible for installation, operation, maintenance or
setting of the system must read and understand this manual.
Target Groups
To use this manual you should know how to handle computer equipment.
Furthermore, to connect the R&S system to a network you should have
experience as a network administrator and know how to set up the required
network connections on the installation site both in hard- and software.
When performing maintenance tasks on the hardware of the R&S system,
you must be qualified to work on, repair and test electrical equipment.
The target groups are differentiated as follows:
●
Client company
●
Setup personnel & administrators
●
Operators
Client Company
The term "client company" applies to persons who use a product for
commercial or economic purposes or authorize a third party for the use or
application of a product, and during operation have the legal responsibility to
users of their product or other thirds.
Setup Personnel & Administrators
Setup personnel and administrators have corresponding technical skills to
perform installation, setup, maintenance, troubleshooting and decommis-
sioning. Administrators are also responsible for the setup within a network,
integration into existing technical infrastructure and the ongoing communica-
tion with the front-end clients over the network.