Rohde & Schwarz SpycerNode SC, User Manual

Page: 13 / 108

Safety
13
User Manual | 2902.5569.01 - 03
Electrical
SpycerNode SC
Electrical
Please observe also the following:
●
The enclosure must only be operated from a power supply input voltage
range of 200-240 VAC. The power supply units, as well as the cooling
fans are hot-swappable.
●
The plug on the power supply cord is used as the main disconnect
device. Ensure that the socket outlets are located near the equipment
and are easily accessible.
●
When powered by multiple AC sources, disconnect all supply power for
complete isolation.
●
A safe electrical earth connection must be provided to the power supply
cords. Check the grounding of the casing before applying power.
●
Provide a suitable power source with electrical overload protection to
meet the requirements laid down in the technical specification.
●
A faulty PSU must be replaced with a fully operational module within 24
hours.
●
The power ratings are: voltage: 200 to 240 VAC; frequency: 50 to 60 Hz.
Electric Shock
Opening or removing the system cover while the system is powered on may
expose you to a risk of electric shock.
Maintenance inside the system should only be performed by
personnel qualified for handling and testing electrical equipment.
Exercise utmost care when performing any kind of work inside the
system while it is on.